Table of Contents
Advertisement
LSQT1157_EB.book 98 ページ ２００６年１２月１１日 月曜日 午後８時４６分
Others
Problem
The indication
disappears.
The screen is frozen.
No operation can be
performed.
"PUSH THE RESET
SWITCH." or "CHECK
THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR IT."
is displayed.
If the SD card is inserted
in another device, it is not
recognized.
98
LSQT1157
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is connected
to a computer. (VDR-D310) (Refer to the operating instructions
for PC connection.)
≥ Turn off the power to this unit. If the power cannot be turned
off, press the RESET button, or remove the battery or AC
adaptor and then reattach it. After that, turn on the power
again. If normal operation is still not restored, detach the
power connected, and consult the dealer who you purchased
this unit from.
≥ Is the disc scratched or dirty?
# After using the following method to restart the unit, eject the disc
and clean it. (l 23) If there are scratches on the disc, use a new
disc.
≥ The unit has automatically detected an error. Press the RESET
button with the projecting part of the lens cap A. This will
restart the unit.
A
≥ If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
≥ Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the
power connected, and consult the dealer who you purchased
this unit from. Do not attempt to repair the appliance by
yourself.
≥ Check that the device is compatible with the capacity or type of
SD card (SD Memory Card/SDHC Memory Card) that you
inserted.
# Refer to the operating instructions of the device for details.
Check points
Advertisement
Table of Contents
