Advertisement
4.0 CONNECTING THE ANTENNA
Check if the broadcast in your country is Horizontal or Vertical polarized.
Click the Antenna in the plastic holder as shown in the pictures:
( H-Broadcast) antenna mounted H
Disconnect your Digital Receiver from the 230 Volts main power.
Connect the supplied coaxial cable to the antenna: carefully press the inner lead of the cable
into the Female-F connector at the back of the antenna. Turn the covering nut clockwise with
your HANDS until it is fixed.
Connect the other side of the coaxial cable to your Digital Terrestrial Receiver. Normally the
input connector on your receiver is marked as "ANT" (in) or as "RF"(in). Refer to the User Manual
of your Digital Terrestrial Receiver.
Connect your Digital Receiver to the 230 Volts main power.
230 V wall
outlet
AC / DC Adaptor
(DC 9V)
4
Rear View
Standing unit (Vertical)
(V-Broadcast) antenna mounted V (Upright)
Coaxial Cable
Digital Terrestrial Receiver
PART 1
English
●
TV
SCART CABLE
Rear View
Advertisement
