Table of Contents
Advertisement
Specification
Problem
Possible cause
You've forgotten
your PIN.
The menus and
The menu language
banners are in
has been changed to
a language you
a language you don't
don't understand.
understand.
Your decoder doesn't
Your RCU might be
react when you press
configurated for
a key of the RCU
DVD, VCR or TV
(the Red
devices.
led on the front
panel doesn't blink).
Specification
Due to continued product improvement, this specification may change without notice.
General
Operating voltage:
Power consumption:
Weight:
Dimensions (W x H x D):
Operating temperature range: 0°C to +40°C
Storage temperature range:
Rear and side panel connectors
Input:
Telephone line:
Others:
Dish input:
Suggested solution
Call customer support for advice.
You can change the menu language as follows:
1. From a digital satellite channel, press MENU.
2. Press W, 3 times to highlight the Preferences
item on the menu, then press OK.
3. Press OK.
The Preferences menu displays.The first,
highlighted item is the language item, press OK.
4. Press B until your language displays.
5. Press BACK. The menus should now be in
your preferred language.
6. Press EXIT to redisplay digital satellite TV.
Press SAT key on the RCU.
12 V DC
20 W (max.)
1.3 kg
252 mm x 42 mm x 138 mm
-20°C to +60°C
DC
RJ11
TV Scart, VCR Scart, Video cinch, audio cinch, Tuner RF,
SPIDIF coaxial
IEC 169-24 F-type female
EN
35
Advertisement
Table of Contents
