Installation and connection
Electrical connection
For the installer
The appliance must be connected to the mains by
a licenced expert. The regulations of your electricity
supplier must be observed.
Any damage arising from the appliance being
connected incorrectly will invalidate the guarantee.
An all pole isolating switch with a contact gap of at
least 3 mm must be present for installation. This is not
necessary if the appliance is connected by a plug that
is accessible to the user.
Electrical safety: The cooker corresponds to safety
class I and may only be used in conjunction with a
safety earth terminal.
A type H 05 VV F or equal rated lead must be used
to connect the appliance.
Appliances with a plug must only be connected to
a properly installed socket with maximum 25 A,
2
3x4 mm
.
13