Installation And Connection; For The Fitter - Siemens HL 62054 Instruction Manual

Installation and connection

For the fitter

The electrical connection must be made by an
approved specialist. Comply with the requirements of
the relevant electricity supply company.
Improper connection will invalidate your warranty.
To comply with the relevant safety regulations, an
all pole isolating switch with a contact gap of at least
3 mm must be present on the installation side. This is
necessary for plug connection appliances if the plug is
accessible to the user.
Appliances with plugs may only be connected to
properly installed, earthed sockets.
In accordance with test specifications for heating, the
appliance conforms to Protection Class Y". Please
ensure that the appliance can be installed on high
room or cabinet walls, by just one side wall.
For reasons of electrical safety, the oven is a
Protection Class 1 appliance, and may only be
operated in conjunction with a protective conductor
terminal.
An H 05 VV F lead or equivalent should be used as
the power supply cord for appliance connection.
7