SOYO SY-6VBA133-B User Manual page 94

Drivers installation
Step 2. Install Drivers and Utilities
The following describes the best way of installing Windows 95 or
Windows 98 on your 6VBA 133-B Motherboard:
Ø
The following BIOS default settings should not be changed:
1. The 'OnChip USB Controller' item under 'Chipset features Setup' is set
to enabled.
2. The 'USB Assigned IRQ' item under 'PnP/PCI Configuration is set to
enabled.
You MUST have these two items enabled for Windows 95/98 to
run properly on your system.
Ø
Install Windows 95/98
Ø
If you installed Windows 95 you will now need to upgrade
your USB driver by running the following program on your
Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
Ø
After installation of windows, you will need to install the
VIA drivers. Follow the instructions below.
Click the Install drivers button to display the list of drivers that can be
installed on your Motherboard. The start-up program displays the drivers
available for the 6VBA 133.
driver
VIA 4 in 1 driver package for Win 9x/NT
6VBA133-B Winbond hardware doctor for Win 95/98
Cancel
OK
(Driver Installation Menu)
90
SY-6VBA133-B
revision: