SOYO SY-6KE Quick Start Manual

Pentium ii processor 82440 lx agp/pci mainboard 66mhz front side bus supported atx form factor

Advertisement

SY-6KE
Mainboard

Quick Start Guide

Tested To Comply
FC
C
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
100%
RECYCLED PAPER

Advertisement

Table of Contents
loading

Summary of Contents for SOYO SY-6KE

  • Page 1: Quick Start Guide

    SY-6KE Mainboard Quick Start Guide Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER 100% RECYCLED PAPER...
  • Page 2 Our customers should ensure that their use of our products does not infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to infringe upon or assist others to infringe upon such rights.
  • Page 3 SY-6KE Quick Start Guide Introduction Congratulations on your purchase of the SY-6KE Mainboard. This Quick Start Guide describes the steps for installing and setting up your new mainboard. This guide is designed for all users to provide the basic steps of mainboard setting and operation.
  • Page 4: Key Features

    SY-6KE Quick Start Guide SY-6KE Mainboard Layout JP10 PS/2 KB PS/2 Mouse Connector Connector Wake-Up by PS/2 Keyboard ATX Power USB 1 USB 2 Slot 1 for ® II Processor Pentium CPUFAN COM 1 ® Intel AGP Set COM 2...
  • Page 5: Installation

    Follow the directions in this section designed to guide you through a quick and correct installation of your new SY-6KE Mainboard. For detailed information, please refer to SY-6KE Mainboard User's guide and Technical Reference online manual included on the CD-ROM packed with your mainboard.
  • Page 6: Install The Mainboard

    SY-6KE Quick Start Guide Install the Mainboard Follow the steps below in order to perform the installation of your new SY-6KE Mainboard. Step 1. Install the CPU Record the working frequency of your CPU Mark your CPU Frequency: that should be clearly marked on the CPU cover.
  • Page 7 Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new SY-6KE Mainboard, please refer to SY-6KE Mainboard User's Guide and Technical Reference online manual on CD-ROM.
  • Page 8 SY-6KE Quick Start Guide...
  • Page 9: Memory Configuration

    (MB) Notice 1: Only install 3.3V EDO DIMM modules on this mainboard; other voltages are not supported by the SY-6KE mainboard. Notice 2: Do not install EDO types of DIMM when you already use SDRAM. Step 4. Set the CPU Frequency You do not need to set any jumper for the CPU frequency.
  • Page 10 SY-6KE Quick Start Guide Step 6. Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap.
  • Page 11: Quick Bios Setup

    Move the cursor to the [CPU Speed] field to set the CPU frequency. Available [CPU Speed] settings on your SY-6KE Mainboard are detailed in the following table. If you set this field to [Manual], you are then required to fill in the next two consecutive fields: (1) the [CPU Host Clock], and (2) the [CPU Ratio].
  • Page 12 Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Menu will display as shown below. (SOYO CD Start Up Program Menu) The SOYO CD Start Up Program automatically detects which SOYO mainboard you own and displays the corresponding model name.
  • Page 13 However, to display the list of all drivers software available with SOYO mainboards, click the Display all drivers on the SOYO CD button. Please make sure to install only the drivers adapted to your system, or otherwise this cause system malfunctions.
  • Page 14 Select which driver you want to install and click OK, or click Cancel to abort the driver installation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active.
  • Page 15 Internet Explorer* browser. Click YES to install the HTML browser. After the installation is complete, please restart your system. Then re-run the SOYO CD and you will be able to browse the SOYO HTML database. (* Internet Explorer is a Microsoft Trademark)
  • Page 16 Fax: 44-(0)181-569 4134 Web Site: http://www.soyo.nl E-mail: sales@soyo.nl Japan Branch Office Soyo Computer (Japan) Tel: 81-3-33682188 Fax: 81-3-33682199 Web Site: http://www.soyo.co.jp E-mail: soyo@po.iijnet.or.jp Hong Kong Branch Office Soyo Hong Kong Ltd. (H.K.) Tel: 852-2710-9810 Fax: 852-2710-9078 Web Site: http://www.soyo.com.hk E-mail: rshu@hkstar.com...

Table of Contents