Table of Contents
Advertisement
To create a connection
1. From the Wireless Manager window, select File
Wizard opens.
Or
Click the Connection Wizard button
2. Select Create a new connection.
3. In the Enter the connection name field, type a descriptive name for the connection.
For example 'My Connection'.
4. Click Next.
Note:
Your connection name should not exceed 16 characters in length for it to be fully visible
in Wireless Manager.
5. The Type of Connection dialogue box is displayed. Select the type of connection that you require:
•
•
Creating a GPRS/EDGE/UMTS connection
1. Select GPRS/EDGE/UMTS.
2. If your network operator is listed in the Choose Network drop-down list, complete
the following steps:
3. Select your network operator, and then click Next. The APN is displayed.
4. Click Next. The user name and password are displayed.
5. If your network operator is NOT listed in the Choose Network drop-down list or you have
a dedicated corporate APN, complete the following steps.
a. Obtain the APN, user name, and password from your network operator or network
a. Select <Other>, and then click Next.
a. In the Primary APN field, enter the APN, and then click Next.
a. On the User ID dialogue box, enter the user ID and password.
6. If you are required to enter a one-time use password each time you log on, clear the Save Password
check box.
Notes:
•
•
7. Click Next.
8. Click Finish to create your connection or Back to review your settings.
For GPRS/EDGE/UMTS see steps 1 to 8.
For CSD see steps 1 to 10.
administrator.
Many network operators leave user ID and password blank.
Windows deliberately changes the number of asterisks that represent a password and place
asterisks in the Password field when the password is empty to make the display secure.
Connection Wizard. The Connection
.
Using Wireless Manager
17
Advertisement
Table of Contents
