Sony Ericsson Wireless Manager 4.0 User Manual page 76

To configure a network connection to use WPA with TKIP or AES encryption and TLS
authentication
1. Open the Windows XP wireless network connection utility.
2. On the Wireless Networks tab, verify that the Use Windows to configure my wireless network
settings check box is selected. If it is not, select the check box.
Note:
If this check box is unavailable, you cannot manage your wireless settings. To configure settings
on the Wireless Networks tab, you must be logged on as an administrator. If you cannot change
the settings on your Wireless Networks tab, contact your network administrator.
3. In the Preferred networks panel, select the wireless network for which you want to configure
a connection and click Properties. If the network you want is not listed, click Add, and then type
the SSID of the network to be configured in the Network name (SSID) field.
4. From the Network Authentication drop-down list, select WPA.
5. From the Data Encryption drop-down list, select TKIP or AES, depending on your network
encryption. Contact your network administrator if you are unsure of which encryption type to use.
6. Click the Authentication tab.
7. Click Properties. The Smart Card properties dialogue box is displayed.
8. In the When connecting pane, select Use a certificate on this computer.
9. In the Trusted Root Certification Authorities list, select the name of the appropriate certificate.
Contact your network administrator if you cannot find the appropriate certificate or you do not
know which one to use.
10. Click OK. The Wireless Network Properties dialogue box is displayed.
11. Click OK.
12. Click OK.
To configure a network connection to use WPA with TKIP or AES encryption and PEAP
authentication
1. Open the Windows XP wireless network connection utility.
2. On the Wireless Networks tab, verify that the Use Windows to configure my wireless network
settings check box is selected. If it is not, select the check box.
Note:
If this check box is unavailable, you cannot manage your wireless settings. To configure settings
on the Wireless Networks tab, you must be logged on as an administrator. If you cannot change
the settings on your Wireless Networks tab, contact your network administrator.
3. In the Preferred networks panel, select the wireless network for which you want to configure
a connection and click Properties. If the network you want is not listed, click Add, and then type
the SSID of the network to be configured in the Network name (SSID) field.
4. From the Network Authentication drop-down list, select WPA.
5. From the Data Encryption drop-down list, select TKIP or AES, depending on your network
encryption. Contact your network administrator if you are unsure of which encryption type to use.
6. Click the Authentication tab.
7. From the EAP Type drop-down list, select Protected EAP (PEAP).
8. Click Properties. The Smart Card properties dialogue box is displayed.
68 Using the Windows XP wireless network connection utility