Sony Ericsson Wireless Manager 4.0 User Manual page 96

How to use wireless manager to configure and operate a sony ericsson pc card

Hide thumbs Also See for Wireless Manager 4.0:

Table of Contents

Locally

Administered

MAC Address

PLCP Header

Item

Power Output

Power Save Mode

RTS Threshold

Appendix B - Changing the wireless LAN adapter properties

This is used to override the MAC address of your Sony Ericsson PC card wireless

LAN network adapter.

This is used to set the header type used for CCK rates. The type can be long,

or auto (short / long).

Useful information

Sets the percentage of the maximum available output power to be used.

This is used to put your computer into the IEEE 802.11 Power Save mode.

In Power Save mode, the radio is periodically powered down to conserve power.

When in Power Save mode, packets are stored in the AP until the PC comes on.

If the number of frames in the data packet is at or above the RTS Threshold,

a request to send/clear to send handshake is turned on before sending the data

packet. The default value is 2347.

Table of Contents