Table of Contents
Advertisement
8. If you need a user ID and password to log on to your service provider, enter them into the appropriate
fields. If you do not need a user ID and password, leave the fields blank.
9. Click Next.
Note:
Windows changes the number of asterisks that represent a password and place asterisks
in the Password field when the password is blank in order to make the display secure.
10. Click Finish to create your connection or Back to review your settings.
Modifying a connection
To modify a connection
1. From the Wireless Manager window, select File
Wizard opens.
2. Select Modify a Connection. The Select a Connection drop-down list is activated.
3. From the Select a Connection drop-down list, click on the menu and select the connection
you want to modify.
4. Click Next.
5. Change the connection settings as required.
Deleting a connection
To delete a connection
1. From the Wireless Manager window, select File
Wizard opens.
2. Select Delete a Connection. The Select the connection name drop-down list is activated.
3. From the Select the connection name drop-down list, select the connection you want to delete.
4. Click Next. The Success dialogue box is displayed.
5. Click Finish to close the Connection Wizard.
Using your connection
To connect to a mobile network by using your GPRS/EDGE/UMTS or CSD connection
1. Open Wireless Manager.
2. If requested, enter your SIM card PIN and click OK. The Status view is displayed.
3. From the connection drop-down list, select the connection that you want to use and click Connect.
4. If requested, enter your user ID and password.
To disconnect from an active GPRS/EDGE/UMTS or CSD connection
1. From the Wireless Manager window, select View Status. The Status view is displayed.
2. In the GSM GPRS/EDGE/UMTS panel, click Disconnect.
Or
Right-click on the Wireless Manager icon in the system tray and select Disconnect.
Connection Wizard. The Connection
Connection Wizard. The Connection
Using Wireless Manager
19
Advertisement
Table of Contents
