Sms - Sony Ericsson Wireless Manager 4.0 User Manual

How to use wireless manager to configure and operate a sony ericsson pc card
Hide thumbs Also See for Wireless Manager 4.0:
Table of Contents

Advertisement

A password, issued with your subscription, is required to turn a call restriction on or off.
Contact your network operator for further information.
To configure call restriction settings for your data calls
1. From the Telephony Settings view, select Restrict Calls
is displayed on the right.
2. Click Retrieve. The call restriction settings that are saved to your SIM card are displayed.
3. Select one of the following options for outgoing calls:
4. Select one of the following options for incoming calls:
5. Click Apply to save the settings to your Sony Ericsson PC card. The Enter the Restrict Calls
password dialogue box is displayed.
6. In the Enter Password field, type your restriction password, and then click OK.
Note:
Data Call Restriction applies only to CSD Data calls. There is no equivalent function to restrict
GPRS/EDGE/UMTS connections.

SMS

SMS Service Centre panel
When you send a text message, it is first sent to your network operator's service centre, which then
diverts it to the correct recipient. The SMS Service Centre is identified by a telephone number.
From the SMS Service Centre panel, you can configure the service centre number.
Note:
The SMS Service Centre number is normally read automatically from your SIM card.
Do not change this number.
To set or change the SMS Service Centre number
1. From the Telephony Settings view, select SMS Service Centre.
2. In the Set active service centre number to field, type the phone number of your operator's
service centre.
3. Click Apply to save the number to your Sony Ericsson PC card.
Cell Broadcast Message panel
From the Cell Broadcast Message panel, you can enter the Short Message Service Cell Broadcast
(SMS CB) message classes that are available from your network operator. SMS CB is used by your
mobile operator to broadcast information messages to users in a specific area. You must select the
required information types.
Outgoing calls
Outgoing international calls
Outgoing international calls except to my country
Incoming calls
Incoming calls when I am abroad
Wireless Manager – Telephony Settings view
Data. The Restrict data calls panel
39

Advertisement

Table of Contents
loading

Table of Contents