Table of Contents
Advertisement
5. Select Set up my connection manually, and then click Next.
6. Select Connect using a dial-up modem, and then click Next.
7. From the Select a Device list, select your Sony Ericsson modem, and then click Next.
8. In the ISP Name field, type a descriptive name to identify the connection.
9. In the Phone number field, type the following:
*99***<connection_ID>#
where <connection_ID> is the connection ID of the DUN configuration that you created.
For example, type the following to connect to connection ID 3:
*99***3#
10. In the Connection Availability dialogue box, select who can use the connection: Anyone's use
or My use only, and then click Next.
11. In the Connection Availability dialogue box, enter your user name and password information.
You can leave these fields empty to be prompted each time you use this connection.
12. Click Next.
13. Click Finish. A dial-up connection dialogue box displays for your new connection.
Note:
If a proxy is required for Web access, close the dial-up connection dialogue box. Open your
Web browser and select Tools
GPRS DUN connection and click Settings. Enter the proxy details in the Proxy Settings pane,
and then click OK. Click OK.
To connect to a GPRS over DUN connection
1. From the Windows desktop, Start
2. Double-click on the GPRS over DUN connection that you created. The receive and transmit
byte counts are displayed.
Note:
You also can create a shortcut to the connection and place it on the WIndows desktop.
It is also possible to configure applications such as Internet Explorer and Outlook Express
to use the DUN connection by default.
To disconnect from a GPRS over DUN connection
From the Windows system tray, right-click the DUN connection icon and select Disconnect.
Or
Click the Disconnect button in Wireless Manager.
Logging on to Windows using a GPRS/EDGE/UMTS dial-up connection
Your Sony Ericsson PC card supports the Windows Log on using dial-up connection feature.
To log on to Windows using a dial-up connection, your Sony Ericsson PC card must be inserted
and the radio must be enabled before you log on. To enable the radio prior to logging on, select
Enable radio immediately when card inserted check box in the Radio Power preferences tab.
See Radio Power tab for GSM GPRS/EDGE/UMTS on page 24 for more details.
Caution:
Never start your PC in this mode if you are in a location where mobile devices should
not be used (for example, on an airplane, in a hospital, or near a blast site).
22
Using Wireless Manager
Internet Options. On the Connections tab, select your
Settings
Control Panel
Network Connections.
Advertisement
Table of Contents
