Setting Date/Time (Clock Set) - Panasonic LUMIX DMC-FX500 Operating Instructions Manual

Preparation

Setting Date/Time (Clock Set)

We recommend selecting [LANGUAGE] (P29) from the [SETUP] menu (P25) before
setting date/time.
•
The clock is not set when the camera is shipped.
1
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
AJoystick
2
Press [MENU/SET].
3
Move 2/1 to select the items (year, month,
day, hour, minute or display sequence), and
move 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P67)
‚: Cancel without setting the clock.
4
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off.
Then turn the camera back on, switch to recording mode, and check that the display
reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting (In
programme AE mode)" procedure below.
20
VQT1Q48
OFF ON
A
:
: