[Stabilizer]; [Min. Shtr Speed] - Panasonic LUMIX DMC-FX500 Operating Instructions Manual

Digital camera model no. dmc-fx500
Table of Contents

Advertisement

Advanced (Recording pictures)
Note
When you take pictures in dark places, picture noise may become noticeable. If picture noise
becomes a problem, we recommend that you take pictures after increasing the setting for
[NOISE REDUCTION] or lowering the setting for each of the items other than
[NOISE REDUCTION].
For details on [REC] mode menu settings, refer to P23.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
[OFF]
[MODE1]:
Jitter is always compensated during [REC] mode.
[MODE2]:
The jitter is compensated for when the shutter button is pressed.
Note
The stabilizer function may not be effective in the following cases.
When there is a lot of jitter.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following a moving subject.
When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
[STARRY SKY] in scene mode.
It cannot be set to [OFF] in the Intelligent auto mode.
In motion picture mode, [MODE2] cannot be set.
For details on [REC] mode menu settings, refer to P23.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
[1/250]/[1/125]/[1/60]/[1/30]/[1/15]/[1/8]/[1/4]/[1/2]/[1]
Minimum shutter speed setting
Brightness
Note
This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed
other than [1/8 ], [
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [
red when the shutter button is pressed halfway.
78
VQT1Q48
ñ³±´²¿n

[MIN. SHTR SPEED]

³
Jitter
] appears on the screen.)

[STABILIZER]

1/250
Darker
Less
1
Brighter
More
] will flash in

Advertisement

Table of Contents
loading

Table of Contents