Panasonic LUMIX DMC-FX500 Operating Instructions Manual page 28

Preparation
| [VIDEO OUT]
•
This will work when the AV cable is connected.
[TV ASPECT]
•
This will work when the AV cable is connected.
[m/ft]
•
All lengths are given in metres in this operating instructions.
[TOUCH GUIDE]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5E; optional) when
formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
[CALIBRATION]
Calibration is not done if correct position is not touched. Touch the [ i ] mark again.
•
28
VQT1Q48
Set to match the colour television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
Set to match the type of TV.
(Playback mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
Change the unit displayed for the distance at which pictures can
be taken.
[m]: The distance is displayed in metres.
[ft]: The distance is displayed in feet.
Set the guide screen including Touch AF/AE or Touch Zoom to
display on the LCD or not.
[OFF]/[ON]
The built-in memory or card is formatted. Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Press [MENU/SET].
2
Touch the orange [r] mark
displayed on the screen in
order with the stylus pen
(supplied) (5 places).
•
A message is displayed once the
position is set.
3
Press [MENU/SET] to finish.