Panasonic LUMIX DMC-FX500 Operating Instructions Manual page 26

Preparation
r [BEEP]
u [VOLUME]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[GUIDE LINE]
•
The [PATTERN] setting is fixed to [
[HISTOGRAM]
— [TRAVEL DATE]
•
Refer to P66 for details.
q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
26
VQT1Q48
This allows you to set the beep and shutter sound.
r [BEEP LEVEL]:
[s] (Muted)
[t] (Low)
[u] (High)
[BEEP TONE]:
[ ]/[ ]/[ ]
1 2 3
Adjust the volume of the speaker to any of 7 levels.
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guide lines are displayed. (P42)
[REC. INFO.]:
[OFF]/[ON]
] in the Intelligent auto mode.
This allows you to set either to display or not display the
histogram. (P43)
[OFF]/[ON]
Set the departure date and the return date of the vacation.
[OFF]/[SET]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
When taking pictures, the LCD monitor is automatically turned off
if the camera has not been used for the time selected on the
setting.
[OFF]/[15SEC.]/[30SEC.]
[SHUTTER VOL.]:
[ ] (Muted)
[ ] (Low)
[ ] (High)
[SHUTTER TONE]:
[ ]/[ ]/[ ]
1 2 3
[PATTERN]:
[ ]/[ ]