About The Flash; Settings In Intelligent Auto Mode - Panasonic LUMIX DMC-FX500 Operating Instructions Manual

•
When [‡] is selected, digital red-eye correction (P45) will turn on depending on the type and
brightness of the subject, so it will become [
•
When [ ] or [
•
Only the following functions can be set in this mode.
[REC] mode menu
–
[PICTURE SIZE]
¢
[STABILIZER] (P78)
¢ The settings which can be selected are different from when other [REC] modes are used.
[SETUP] menu
–
[CLOCK SET]/[WORLD TIME]/[TRAVEL DATE]/[BEEP]/[LANGUAGE]
•
The settings of the following items are fixed.
Item
[GUIDE LINE] (P26)
[ECONOMY]
([POWER SAVE]) (P26)
[AUTO REVIEW] (P27)
Focus range
Self-timer (P48)
[QUALITY] (P70)
[INTELLIGENT ISO] (P70)
[WHITE BALANCE] (P71) [AWB]
[METERING MODE] (P73)
[AF MODE] (P74)
[QUICK AF] (P75)
[I.EXPOSURE] (P76)
[AF ASSIST LAMP] (P79) [ON]
• The following functions cannot be used.
–
[EXPOSURE]/[AUTO BRACKET]/
[PICT.ADJ.]/[MIN. SHTR SPEED]/[AUDIO REC.]/[HISTOGRAM]
•
The other items on the [SETUP] menu can be set in the mode such as the Programme AE
mode. What is set will be reflected in the Intelligent auto mode.

About the flash

] is set, the flash is activated twice.

Settings in Intelligent auto mode

¢
(P69)/[ASPECT RATIO] (P70)/[BURST] (P76)/[COLOR EFFECT]
( [REC. INFO.]: [OFF])
[5MIN.]
[2SEC.]
The focus range becomes the same as macro mode.
[5 cm (Wide)/1 m (Tele) to ¶
•
The maximum close-up distance (the shortest distance at
which the subject can be taken) differs depending on the zoom
magnification.
10 seconds
A (Set to [›] when picture size is [
ISOMAX
800
C
š (Set to [•] when a face cannot be detected)
[ON]
[ON]
White balance fine adjustment
], [ ], or [
Settings
(infinity)
].
¢
] (P47)
] (0.3M ))
/[DIGITAL ZOOM]/
VQT1Q48
Basic
(P77)/
33