Selecting The [Rec] Mode - Panasonic LUMIX DMC-FX500 Operating Instructions Manual

Preparation
Mode switching

Selecting the [REC] Mode

When the [REC] mode is selected, the camera can be set to the Intelligent auto mode in
which the optimal settings are established in line with the subject to be recorded and the
recording conditions, or to the scene mode which enables you to take pictures that match
the scene being recorded.
1
Turn the camera on.
A[REC]/[PLAYBACK] selector switch
B[MODE] button
2
Slide the [REC]/[PLAYBACK] selector
switch to [¦/!].
3
Press [MODE].
4
Touch the recording mode to select.
∫ List of [REC] modes
¦
Intelligent auto mode (P31)
The subjects are recorded using settings automatically selected by the camera.
»
Programme AE mode (P34)
The subjects are recorded using your own settings.
¹
Aperture-priority AE mode (P50)
The subjects are recorded with set aperture.
¼
Shutter-priority AE mode (P51)
The subjects are recorded with set shutter speed.
º
Manual exposure mode (P52)
The subjects are recorded with set aperture and shutter speed.
Û
Scene mode (P57)
This allows you to take pictures that match the scene being recorded.
$
Motion picture mode (P64)
This mode allows you to record motion pictures with audio.
Note
•
When the mode has been switched from [PLAYBACK] mode to [REC] mode, the previously set
[REC] mode will be set.
30
VQT1Q48
OFF ON
A
B