Table of Contents
Advertisement
Installing the anchor bolts
1.
Remove the four cover caps.
2.
Insert the anchor bolts into each
anchor bolt hole.
3.
Tighten each bolt with the spanner.
NA-148VB4_English.indb
33
Moving and Installing
Levelling the appliance
1.
On each leg, loosen the plastic nut by
turning it clockwise.
2.
Adjust each foot by turning it
clockwise or anticlockwise.
3.
Use a spirit level to make sure that
the appliance is properly levelled.
4.
Tighten each plastic nut by turning it
anticlockwise.
Caution
Make sure that all plastic nuts are
-
tightened securely and the feet are
still bolted to the appliance.
If they are unbolted, the appliance
will move around.
-
Do NOT put cardboard, wood
or similar materials under the
appliance to compensate for
unevenness.
-
Be careful not to destabilize the
appliance when cleaning the floor.
Installation Instructions - 33
Plastic nut
Foot
2011-12-26
13:58:22
Hide quick links:
Advertisement
Table of Contents
