Optional Functions; Extra Rinse Function; Child Lock; Preset Timer - Panasonic NA-127VB4 Operating Instructions & Installation Instructions

Optional Functions

Extra Rinse function

Note
Extra Rinse functions cannot be used
with certain programmes. (See pages
18-19.)
If you select it when it is unavailable,
an error alarm will sound.
Press the Extra Rinse button
select the function.
The button will flash.
Function
Extra
Rinse your laundry more
Rinse
thoroughly with an extra
rinsing process.

Child lock

When the child lock is activated, the
controls are locked (the door will not
be locked). This prevents children from
changing the wash settings or playing with
the appliance.
Activating/deactivating child lock
1. Switch on the appliance.
2. Press and hold the Extra Rinse
button for at least 5 seconds.
The symbol light up to show that the
child lock is activated.
3. To deactivate, hold down the Extra
Rinse button again for 5 seconds
(please ignore three beeps heard,
keep Extra Rinse button pressed until
it deactivates).
22 - Washing Instructions
NA-148VB4_English.indb 22
to
Description

Preset timer

You can use the timer to preset the wash to
start anywhere from 1 to 24 hours later.
Note
Do NOT use detergent which does not
dissolve thoroughly with the preset
function, because the detergent might
cake up before the wash starts and not
flow out.
Setting a preset time
Set a preset time after you have selected
the programmed and optional functions
(see page 14).
1. Continuously press the Time button
until the desired preset time is
displayed.
2. Press the Temperature button or the
Extra Rinse button to set the preset
time.
The countdown has not started.
- To cancel the preset time
Press the Time button.
- To change the preset time
Press the Time button, then redo the
setting from step 1.
3. Press the Start/Pause button to
activate the countdown.
- To cancel the preset time
Turn the programme selection dial to
'Off'. (All settings will be cancelled.)
- To change the preset time
Turn the programme selection dial to
'Off'. After reselecting the programme
and optional functions, redo the setting
from step 1.
2011-12-26 13:58:19