Warning/Alarm Indications - Panasonic Digital Palmcorder PV-GS150 Operating Instructions Manual

Digital video camcorder
Table of Contents

Advertisement

Available languages

Available languages

100-0001:
Folder/File display
No.00:
File number
1:
Number of DPOF Setting
:
Lock setting
:
[640k480] Image size
640
:
[1280k960] Image size
1280
:
[1760k1320] Image size
1760
≥For images not recorded with this Camcorder,
the size display is determined as follows
according to the number of horizontal pixels.
:
2048 or more
QXGA
:
1600 or more, less than 2048
UXGA
:
1280 or more, less than 1600
SXGA
:
1024 or more, less than 1280
XGA
:
800 or more, less than 1024
SVGA
:
640 or more, less than 800
640
(The size is not displayed at
under 640 pixels.)
66
LSQT0861
Others
-46-
-46-

Warning/alarm indications

If any one of the following indications lights up or
flashes, please check the Camcorder.
Confirmatory indications
Y: A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--]/0:
The built-in battery is low.
°: The warning/alarm indication appears when
you record yourself. Turn the LCD monitor
towards the viewfinder and check the
warning/alarm indication.
: No card is inserted.
REMOTE :
An incorrect remote control mode has been
selected.
-25-
2END:
The tape came to the end during recording.
::
The video heads are dirty.
Textual indications
3DEW DETECT/3EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction.
LOW BATTERY:
The battery is low. Recharge it.
NO TAPE :
No tape is inserted.
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting audio dubbing or digital
dubbing on a tape with the accidental
erasure prevention slider placed in the
[SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been
selected. This is only displayed at the first
operation of the remote control after
powering-on.
-25-
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a
different TV system. This cassette is
incompatible.
UNPLAYABLE CARD:
You are attempting to play back data not
compatible with this Camcorder.
-23-
-72-
-72-
-16-
-17-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents