With A Pc; Using The Camcorder With A Pc; Using Usb Driver - Panasonic Digital Palmcorder PV-GS150 Operating Instructions Manual

With a PC

Using the Camcorder with a PC

An image stored on the DV Cassette can be
transferred to your personal computer.
ª
Software Installation
1
Turn on Computer and start up Windows.
2
Insert supplied CD-ROM into the CD-ROM
drive.
≥[Setup Menu] appears.
3
Select the software to be installed from
[Setup Menu].
≥USB Driver
:
-51-
The USB driver to be installed is the
dedicated Mass Storage Driver for Windows
98SE.
≥Video Stream Driver
If the Camcorder is connected to your
personal computer, you can send video from
the Camcorder to the other parties via a
network or by the Internet. It is also needed
when you use MotionDV STUDIO with USB
connection.
≥DirectX
To activate MotionDV STUDIO, Microsoft
DirectX 9.0b or later should be installed. (If
you install Video Stream Driver, DirectX 9.0b
is automatically installed.)
≥MotionDV STUDIO
Using the MotionDV STUDIO software allows
you to capture video recorded on a tape or
images viewed through the lens of a
Camcorder. Connecting the Camcorder with
the DV cable also allows you to output
images edited on the personal computer to
the tape in the Camcorder.
4
Follow the instructions on the computer
screen until the installation is complete.
≥Setup window will disappear when the
installation is complete.
Note:
If a window does not appear automatically, click
the "Start" Button on your desktop and then click
"Run". When the "Run" Box is open, type in
"D:\InstMenu.exe" and click "OK". ("D" is used
when the CD-ROM drive is drive D.)
With a PC
:
-53-
:
-55-

Using USB Driver

ª Operating environment
≥Despite having the operating environment
indicated, it may not be possible to use the
program with some types of personal
computers.
≥A CD-ROM drive is required to install this
program.
≥When you connect to an USB 2.0 interface
board, use a certified board with the USB 2.0
(HI-SPEED USB) logo.
For Windows
OS:
IBM PC/AT compatible personal computer with
pre-installed;
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Interface:
USB 1.1 or more
≥For Windows Me/2000/XP users, the USB
equipment operates with the driver installed as
standard in OS.
For Macintosh
OS:
Mac OS X v 10.1–X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
≥The USB equipment operates with the driver
installed as standard in OS.
ª
Installing the USB Driver
When your OS is Windows 98SE, please install
USB Driver first before connecting the Camcorder
to your personal computer with the USB
connection Cable.
1
Turn on the personal computer and start up
Windows.
2
Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3
Click the [USB Driver].
≥The set up program starts running.
4
Click [Restart] if the [InstallShield] dialog
appears.
≥Do not remove the CD-ROM.
5
Finish installation by following the
on-screen instructions.
51
LSQT0861