Recording On A Tape; Recording Still Pictures On A Card While Recording Image Onto A Tape - Panasonic Digital Palmcorder PV-GS150 Operating Instructions Manual

Recording on a tape

≥Open the lens cover. (
(When the Camcorder is turned on with the lens
cover closed, the automatic white balance
adjustment may not function properly. Please
turn the Camcorder on after opening the lens
cover.)
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
2
Press the recording start/stop button again
to pause recording.
≥For details on the recording time on a tape, refer
to .
-17-
≥Carry out a recording check (
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
ª
On-screen display in the tape
recording mode
¢These indications are displayed only when the
card is inserted.
1) Recording time elapsed
2) Remaining tape indication
3) Still picture size
28
LSQT0861
)
-19-
;
) to verify that
-29-
) .
-29-
1)
2)
3)¢
4)¢
5)¢
Record mode
4) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
5) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
ª [POWER SAVE]
[OFF]:
[5 MINUTES]: When 5 minutes passes without
≥The Camcorder cannot be automatically turned
off when you connect the USB connection cable
or the DV cable with the Camcorder or when the
Camcorder is in the PC mode.
Recording still pictures on a card
while recording image onto a tape
You can record still pictures while recording
image onto a tape.
≥Set to Tape Recording Mode.
1
Press the [PHOTO SHOT] button fully while
recording image onto a tape.
≥For the number of still pictures to be recorded
on a card, refer to
≥When recording pictures onto a card, the
recording start/stop button is disabled.
When 5 minutes passes without
any operation, the standby mode
will be automatically set. In the
standby mode, [;] blinks and it
takes more time than usual to start
recording after you press the
recording start/stop button.
any operation, the Camcorder
automatically turns off to protect
the tape or to prevent the battery
from running down. When you
want to use the Camcorder, turn it
on again.
PHOTO
SHOT
.
-78-