Selecting A Single Picture And Printing It; Selecting Multiple Pictures And Printing Them - Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Connecting to other equipment
•
You cannot switch between the built-in memory and the card while the camera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
1
Press 2/1 to select the picture and then press
[MENU/SET].
•
The message disappears in about 2 seconds.
2
Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to P99 for the items which can be set before starting to print
the pictures.
•
Press [MENU/SET] to cancel printing halfway.
•
Disconnect the USB connection cable after printing.
1
Press 3.
2
Press 3/4 to select an item and then press [MENU/
SET].
•
If the print check screen has appeared, select [YES], and print
the pictures.
Item
[MULTI SELECT]
[SELECT ALL]
[DPOF PICTURE]
¢
[FAVORITE]
¢ Only when [FAVORITE] is at [ON] and when there are pictures set as favourites. (P90)
3
Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to P99 for the items which can be set before starting to print
the pictures.
•
Press [MENU/SET] to cancel printing.
•
Disconnect the USB connection cable after printing.
98
VQT1T00

Selecting a single picture and printing it

Selecting multiple pictures and printing them

Multiple pictures are printed at one time.
Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is
•
pressed, [ é ] appears on the pictures to be printed. (When [DISPLAY] is
pressed again, the setting is cancelled.)
•
After the pictures have been selected, press [MENU/SET].
Prints all the stored pictures.
Prints the pictures set in [DPOF PRINT] only. (P90)
Prints the pictures set as favourites only. (P90)
Description of settings