[Text Stamp] - Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Advanced (Playback)
[MULTI] setting
1
4
In step , delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode or [LOCATION] in travel date
can also be registered by using the operation in steps
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and
[TITLE EDIT] cannot be registered at the same time.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO-viewer-" bundled software
on the CD-ROM (supplied).
•
You can set up to 50 pictures at one time with [MULTI].
•
You cannot use titles edit for pictures taken with other equipment.
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [
resized when stamping the date etc. on them.)
1
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P18)
2
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
Select the picture, and then press
[MENU/SET] to set.
•
['] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
•
The setting is cancelled when [DISPLAY]
is pressed again.
4
Press 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/OTIME]:
[WITHTIME]:
[AGE] (P52)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
84
VQT1T00

[TEXT STAMP]

Stamp the year, month and date.
Stamp the year, month, day, hour and minutes.
4
and following.
[SINGLE]
Press 2/1 to
select the picture.
] will be
[MULTI]
Press 3/4/2/1 to
select the pictures.