Connecting To Other Equipment; Connecting To A Pc - Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Connecting to other equipment

Connecting to other equipment

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC.
•
You can easily print out or mail the pictures you have imported. Use of the
"
PHOTOfunSTUDIO-viewer-
way of doing this.
•
Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
1
Connect the camera to a PC via the USB connection cable A
(supplied).
•
Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (DMW-AC5E; optional)
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5E; optional). If the
remaining battery power becomes low while the camera and the PC are communicating, the
status indicator blinks and the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
connection cable. Otherwise, data may be destroyed.
94
VQT1T00
"
bundled software on the CD-ROM (supplied) is a convenient
"
(P95) before disconnecting the USB