[Flash Burst] - Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Advanced (Recording pictures)
2
Press 3/4 to select the picture size and aspect ratio and
then press [MENU/SET] to set.
•
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
3
Take pictures.
•
Still pictures are taken continuously while the shutter button is
pressed fully.
Maximum Burst speed
Number of recordable
pictures
•
The burst speed changes according to the recording conditions.
•
The number of burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
•
The number of burst recording pictures increase immediately after formatting.
Note
•
[QUALITY] is automatically fixed to [›].
•
You can take pictures suitable for 4qk6q/10k15 cm printing.
•
The shutter speed becomes 1/8th of a second to 1/2000th of a second.
•
The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/30 cm (0.99 feet)
(Tele) to ¶]
•
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•
The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter speed.
Still pictures are taken continuously with flash. It is convenient to take continuous still
pictures in dark places.
∫ Picture size and aspect ratio
1
Press 3/4 to select the picture size and aspect ratio and
then press [MENU/SET] to set.
•
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
2
Take pictures.
• Still pictures are taken continuously while the shutter button is
pressed fully.
Number of recordable
pictures
Note
•
[QUALITY] is automatically fixed to [›].
•
You can take pictures suitable for 4qk6q/10k15 cm printing.
•
The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/30 cm (0.99 feet)
(Tele) to ¶]
•
The focus, zoom, exposure, shutter speed, ISO sensitivity, and flash level are fixed to the
settings for the first picture.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO3200].
•
See the Note on P42 when using the flash.
54
VQT1T00
approx. 7 pictures/second (Speed priority)
approx. 5 pictures/second (Image priority)
approx. 30 to 100 (Speed priority)
approx. 35 to 100 (Image priority)

[FLASH BURST]

max. 5 pictures