•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
•
This will work when the [SENSITIVITY] is set to [AUTO] or when the Intelligent ISO is set to
[ON].
•
When [INTELLIGENT ISO] is set to [AUTO], and [ISO LIMIT SET] is set to [AUTO], the ISO
sensitivity is automatically set to a maximum of [ISO400] ([ISO1000] when the flash is used)
according to the brightness.
For details on [REC] mode menu settings, refer to P18.
In sunlight, under incandescent lights or in other such conditions where the colour of white
takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest
to what is seen by the eye in accordance with the light source.
Applicable modes:
[AWB]: Automatic adjustment
[V]:
When taking pictures outdoors under a clear sky
[Ð]:
When taking pictures outdoors under a cloudy sky
[î]:
When taking pictures outdoors in the shade
[Ñ]:
When taking pictures under incandescent lights
[
]:
1
When
using the preset white balance
[
]:
2
[
]:
When using the preset colour temperature setting
Note
•
The optimal white balance will differ depending on the type of halogen lighting being recorded
under so use [AWB], [
•
The white balance setting is memorised even if the camera is turned off. (However, the white
balance setting for a scene mode returns to [AWB] when the scene mode is changed.)
∫ Setting the white balance manually
This will set the values for the white balance. Use it in accordance with
the recording conditions.
1
Select [
] or [
1
2
Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and then
press [MENU/SET].
= [WHITE BALANCE]
³²¿n
] or [
].
1
2
] and then press 1.
2
Advanced (Recording pictures)
VQT1T00
65