Adjusting The White Balance - Panasonic LUMIX DC-FT7 Operating Instructions For Advanced Features

4. Focus, Brightness (Exposure) and Colour tone Settings

Adjusting the White Balance

Applicable modes:
In sunlight, under incandescent lights or in other such conditions where the colour of white
takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest
to what is seen by the eye in accordance with the light source.
1
Select the menu.
>
MENU
2
Press 2/1 to select the White Balance.
[AWB] Automatic adjustment
[V] When taking pictures outdoors under a clear sky
[Ð] When taking pictures outdoors under a cloudy sky
[î] When taking pictures outdoors in the shade
[Ñ] When taking pictures under incandescent lights
[ ] ¢ When taking pictures with the flash only
Set the White Balance value. Use to match the
condition when taking photographs.
1 Press
2 Place a white object such as a piece of paper
[Ò]
• This will set the White Balance and return you to the recording screen.
• The same operation can be performed by pressing the shutter button.
• White Balance may not be set when the subject is too bright or too dark.
¢ [AWB] is applied when you record motion picture or perform recording with the 4K
Photo or Post Focus function.
3
Press [MENU/SET] to set.
[Rec] > [White Balance]
3 .
within the frame at the centre of the screen, and
press [MENU/SET].
Set the White Balance again after adjusting to appropriate brightness.
73
WB WB WB WB WB WB WB WB WB WB WB
AWB AWB