Sanyo LCD-32K40TD Instruction Manual page 21

To set Reserve
1
Press EPG button to display the OSD as Picture 1, press
▲, ▼, ◄ or ► button to select one programme, then press
BLUE button to enter into Reserve menu as Picture 2.
2
In the Reserve menu, press ▲, ▼, ◄ or ► button to set
Programme, Hour, Minute, Mode, Date, Month and Week.
3
After setting Reserve, press OK button to enter into the
menu as Picture 3, and the Reserve information will be
saved in the Schedule LIST in this menu. 5 programmes
can be saved at most.
4 When 5 programmes have been saved in Schedule LIST,
if pressing bule key to set Reserve in Picture 1's menu,
the screen will display "Schedule List Full", shown as
Picture 4.When the Schedule List is full, if Reserve set is
still needed, must enter into the Schedule List as Picture 3,
press ▲ or ▼ button to select the programme which has
been set as Reserve, and press RED button to delete.
5
When the TV is ON, if the reserved programme starts in
15sec, it will start to count down as Picture 5. Press ◄ or ►
button to select Yes, and press OK button to switch to the
reserved channel. Press ◄ or ► button to select No, and
press OK button to stop switching to the reserved channel,
the count time OSD will disappear.If there is no operation,
TV will switch to the reserved channel when the count time
is over.
Note:
● The different programmes in same time cannot be set as
Reserves, or the screen will display "Time Overlapped".
● In stand by mode, if the Reserve time is coming, TV will
power on and switch to the reserved channel.
● If the ON TIMER and the Reserve are set as the same time,
Reserve will be operated first.
● If the ON TIMER is earlier than Reserve time, ON TIMER
will be operated first, then operate Reserve when Reserve
time is coming.
● If the Reserve time is earlier than ON TIMER, the ON
TIMER will not be operated after Reserve has been
operated.
● After Reserve enactment is executed, If no operation in 2
hours, LCD TV will be off automatically.
● When the time set as Reserve is coming soon, TV will dis
play the Reserve. When time is up, TV will switch to the
channel set as Reserve automatically.
● All programmes in Schedule List will be removed after Auto
Tuning or reset TV.
● DTV programmes and Radio programmes can be switched
by pressing TV/ Radio button.
To view programme's brief introduction
In the Menu as Picture 1, press ▲, ▼, ◄ or ► button to
select one programme, and press INFO button to enter into
the information as Picture 6, and brief introduction of the
programme will be displayed.
BASIC OPERATION
Formula 1 ING Australian Grand Prix
Formula 1 ING Australian Grand Prix
Formula 1 ING Australian Grand Prix
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6
21