Text Subcode; Text Size; Text Hold; Text Red/Green/Yellow/Blue - Sanyo LCD-32K40TD Instruction Manual

TELETEXT
1
Press the TEXT SUBCODE button, "110/. . . ." will be displayed (e.g. the current page is 110).
2
Press the NUMERIC buttons(0-9) to enter the sub page. For example, to select sub page 4, press
NUMERIC buttons 0-0-0-4, and "110/0004" will be displayed.
Press TEXT SIZE button to enlarge the top half of the text page.
Press TEXT SIZE button again to enlarge the bottom half of the text page.
Press TEXT SIZE button again to return to the normal size page.
Normal -> top half enlargement -> bottom half enlargement -> normal
Note:
■ During the top half enlargement or the bottom half enlargement mode, if a page request is performed by
[0] - [9] buttons and TEXT INDEX button, it will become the normal mode and a page will be requested.
■ If HOLD ON / OFF is performed during the top half enlargement mode, it will still at the top half
enlargement mode. (A HOLD symbol displays.)
■ If HOLD ON / OFF is performed during the bottom half enlargement mode, it will still at the bottom half
enlargement mode. (A HOLD symbol does not display.)
Press TEXT HOLD button to stop page request and updating.
■ HOLD ON: The symbol
Update of TELETEXT is forbidden. It stops on the TEXT screen display now.
■ HOLD OFF: A status display will be page number display.
■ TELETEXT page data is updated.
■ The present page is re-requested. (header roll)
■ A screen is updated by reception of the UPDATE signal.
■ A screen is eliminated by reception of an ERASE signal.
■ TEXT HOLD button does not work except a text function.
TEXT RED/ GREEN/ YELLOW/ BLUE
Coloured areas are displayed at the bottom of the screen. The 4 coloured buttons are used to stop or
resume sub-page acquisition.
24

TEXT SUBCODE

TEXT SIZE

TEXT HOLD

will appear instead of the page number.