Different Kinds Of Playback For Bd-Video - Panasonic SC-BT100 Operating Instructions Manual

Different kinds of playback for BD-Video

[BD-V]
Some discs permit a variety of interactive functions in addition to the ordinary playback operation.
Showing Pop-up menu
The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating
method, refer to the instructions for the disc.
1 Press [POP-UP MENU].
2 Press [3, 4, 2, 1] to select the
item and press [OK].
≥The BONUSVIEW ["Picture-in-picture", "Virtual package" (
playback and the operating method may vary with the disc. For details, refer to the instructions for the disc.
Playing secondary video (picture-in-picture) and secondary audio
Secondary video can be played from a disc compatible with the
picture-in-picture function.
For the playback method, refer to the
instructions for the disc.
To turn on/off secondary video
Press [PIP].
Secondary video is played.
≥"PiP ON" is displayed.
≥Press the button to turn it ON and OFF.
To turn on/off audio with the secondary
video
Press [SECONDARY AUDIO].
The secondary audio is played.
≥"Secondary Audio ON" is displayed.
≥Press the button to turn it ON and OFF.
Virtual package
For a disc compatible with the virtual package (
other media ( 44, Local storage) from the disc to use the different
functions while playing the data.
For this unit, data is copied to an SD card.
The methods for copy and playback and the required available capacity
on the card may vary with the disc. For details, refer to the instructions for
the disc.
To use the above functions, it is recommended that you format the card
on this unit.
Format the card using the following procedures. BD-Video data, such as
secondary video recorded on the card, can also be erased with the
following procedures.
∫ Formatting SD cards/Deleting data
1 Insert an SD card ( 16).
2 Press [FUNCTIONS].
3 Press [3, 4] to select "To Others" and press [OK].
4 Press [3, 4] to select "Card Management" and press
[OK].
5 Press [3, 4] to select "BD-Video
Data Erase" or "Format SD Card"
and press [OK].
6 Press [2, 1] to select "Yes" and
press [OK].
7 Press [2, 1] to select "Start" and
press [OK].
RQT9161
26
e.g.,
TIPS
below), etc.] is a new playback function of BD-Video. Contents of
NOTE
Secondary video
Primary video
44), data is copied to
NOTE
Card Management No. of Files 6
Free space 300 MB
SD CARD
TIPS
BD-Video Data Erase
Format SD Card
OK Format this SD Card.
RETURN
NOTE
≥Pop-up menu also appears by pressing
[OPTION] and selecting "Pop-up Menu".
To exit the screen
≥Press [POP-UP MENU].
≥Only the primary video is played during
search/slow-motion or frame-by-frame.
≥Frame-by-frame is not available for some
BD-Video discs that contain
picture-in-picture function.
≥When "BD-Video Secondary Audio" in
"Sound" menu is set to "Off", secondary
audio will not be played even if
[SECONDARY AUDIO] is pressed. Please
check that "BD-Video Secondary Audio" is
set to "On" ( 35).
≥If the SD card is removed from this unit
when using data that was copied with the
virtual package function, disc playback
stops.
≥Images and audio may freeze momentarily
during playback.
≥Data cannot be copied in the following
cases.
–The card is protected.
–Available capacity on the card is too
small. Delete unnecessary data or use a
new card.
≥When the function fails to work properly,
even if the data is copied, format the card
again with this unit. (In this case, all data
will be erased.)
≥If an SD card with files in different formats
is used, images and audio may not play
back properly. It is recommended that you
use an SD card with no data or an SD card
formatted on this unit.
≥It is impossible to restore data after
formatting the card or erasing the data.
Once a card is formatted, all data including
those recorded on the PC is erased as
well, even if the data were protected with
other equipment.
Confirm whether the card can be
formatted.