Panasonic SC-BT100 Operating Instructions Manual page 36

Changing settings with the Setup menu
Summary of settings
"TV/Device Connection" menu
TV Aspect
Set to match the type of TV connected.
Time Delay
When connected with a Plasma display, adjust if you
notice the audio is out of sync with the video.
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Mode
Select "On" when video is output from HDMI AV
OUT terminal.
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as "¢". When any item
without "¢" is selected, the images may be
distorted.
BD-Video 24p Output
When playing BD-Video recorded in 24 frames, this
unit displays each frame at 1/24 second intervalssthe
same interval originally shot with the film movie.
≥This item can be set only when the unit is
connected to a TV with an HDMI terminal that
supports 1080/24p input.
HDMI Output Range
Effective when connected to a device that only
supports RGB output.
HDMI Audio Output
This setting selects whether or not to output audio
from HDMI.
≥When this is set to "On", Dolby TrueHD, Dolby
Digital Plus, DTS-HD Master Audio, DTS-HD
High Resolution Audio are output as Dolby Digital
from system speakers.
VIERA Link
Set to use "HDAVI Control" function when
connected with an HDMI cable to a device that
supports "HDAVI Control".
Component Resolution
This sets the video output resolution when using
COMPONENT VIDEO OUT terminals.
TV System
Change the setting to match the equipment you are
connecting with.
≥If picture output is not smooth, change the setting.
≥When NTSC contents are played, they are outputted
RQT9161
in the signal format specified in the "NTSC Contents
Output", irrespective of the settings here.
36
Boxed items are the factory presets.
When connected to a 4:3 aspect TV:
≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan &
≥4:3 Letterbox:
When connected to a 16:9 widescreen TV:
≥16:9 :
≥16:9 Full:
[Auto]
≥ ≥0ms ≥20ms ≥40ms ≥60ms ≥80ms ≥100ms
≥120ms≥140ms
When using VIERA Link "HDAVI Control" with "HDAVI Control 3"
compatible TV (
be set in sync. (This works only when "BD/DVD/CD", "SD", "AUX" or
"D-IN" is selected as the source.)
[On]
≥
: Images are output from the HDMI terminal in the resolution set in
"HDMI Video Format". Video from COMPONENT VIDEO OUT
terminal is output as "576i/480i".
≥Off
Images are output in the resolution set in "Component Resolution".
[Automatic]
≥
: Automatically selects the output resolution best suited to
≥576p/480p ≥720p ≥1080i ≥1080p
When the unit is connected to an amplifier/receiver that does not support
the resolution set on the unit, the video cannot be output properly. In this
case, use the HDMI cable to connect the unit to the TV and then connect
the unit to the amplifier/receiver using a cable other than HDMI.
≥On: Images in 24p are output in 24p as they are. (This is effective only
when "HDMI Video Format" is set to "Automatic" or "1080p" and "TV
Aspect" is set to "16:9" or "16:9 Full".) However,
–when video is being output at 24 frames, images from any other
terminal than the HDMI terminal may not be output properly.
– when images other than 24p are played, images are output at 60p.
≥[Off]
[Standard]
≥
≥Enhanced: When the black and white images are not distinct.
≥On: To output audio through TV speakers (output as 2ch PCM,
regardless of source audio format channel number).
[Off]
≥
: To output audio through system speakers. (The audio is output
using the settings of this unit.)
[On]:
≥
Select when you want to use "HDAVI Control".
≥Off: Select when you do not want to use "HDAVI Control".
[576i/480i]
≥
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
Even if you select "720p" or "1080i", the video output resolution is
restricted to "576p/480p" when DVD-Video, DivX and BD-Video discs
recorded at a rate of 50 frames per second is output from the
COMPONENT VIDEO OUT terminals.
≥NTSC: Select when connecting to a NTSC TV.
[PAL]
≥
: Select when connecting to a PAL or multi-system TV.
Scan (unless prohibited by the producer of the disc).
When playing BD-Video, video is output as "4:3
Letterbox".
Video recorded for a widescreen is played in the
letterbox style.
Video recorded for 4:3 aspect screen is displayed as a 4:3
ratio image in the centre of the screen.
Video recorded for 4:3 aspect screen is displayed as a
horizontally stretched 16:9 image.
30), select "Auto". Audio and video will automatically
the connected TV (1080p, 1080i, 720p or 576p/480p).
≥576p/480p ≥720p ≥1080i