Step 2 Basic Connections - Panasonic SC-BT100 Operating Instructions Manual

2
Basic connections
STEP
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Turn off all equipment before connection and read the appropriate operating instructions.
Speaker cables connection
Sheet of speaker cable
stickers
Preparation
∫ Attach the speaker cable stickers to make connection
easier.
e.g., Centre speaker
CENTER
5
This unit
Purple
Subwoofer
≥Insert the wires fully.
NOTE
Push!
RQT9161
6
Speaker cable for front
speaker (L) (White)
CENTER
Speaker cable sticker
5
(included)
SPEAKERS
6 5 2 1
6 6 6
R L FRONT
SUBWOOFER CENTER
Green
Red
Center
Centre speaker
i: White
j: Blue
Speaker cable for front
speaker (R) (Red)
White
Connect to the terminals
of the same colour.
Speaker cables (included)
Front
Front speaker (R) Front speaker (L)
≥Be careful not to cross (short-circuit) or reverse the
polarity of the speaker wires as doing so may damage
the speakers.
Do not
Speaker cable for
centre speaker (Green)
[When using the optional
wireless accessory:
DIGITAL
SH-FX67 (
PUSH PUSH
TRANSMITTER
Digital transmitter cover
PUSH
PUSH
You can use the blunt
end of a writing
instrument to push
here until the cover
pops out.
≥Remove the digital
transmitter cover before
Front
installing any optional
Panasonic wireless
accessory.
≥Replace the cover when the
digital transmitter is not in
use.
)]
4
PUSH
DIGITAL
PUSH
TRANSMITTER