Different Kinds Of Playback For Bd-Video - Panasonic SC-BT100 Operating Instructions Manual

Different kinds of playback for BD-Video

Some discs permit a variety of interactive functions in addition to the ordinary playback operation.
Showing Pop-up menu
The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to
the instructions for the disc.
Press [POP-UP MENU].
Press [, , , ] to select the
item and press [OK].
pThe Final Standard Profile ["Picture-in-picture", "Virtual Package" (> below), etc.] is a new playback function of BD-Video. Contents of
playback and the operating method may vary with the disc. For details, refer to the instructions for the disc.
Playing secondary video (picture-in-picture) and secondary audio
Secondary video can be played from a disc compatible with the picture-in-picture
function.
For the playback method, refer to the instructions for the disc.
To turn on/off secondary video
Press [PIP].
Secondary video is played.
p"PiP ON" is displayed.
pPress the button to turn it ON and OFF.
To turn on/off audio with the secondary video
Press [SECONDARY AUDIO].
The secondary audio is played.
p"Secondary Audio ON" is displayed.
pPress the button to turn it ON and OFF.
Virtual package
For a disc compatible with the virtual package (> 43), data is copied to other media
(> 43, Local storage) from the disc to use the different functions while playing the
data.
For this unit, data is copied to an SD card.
The methods for copy and playback and the required available capacity on the card
may vary with the disc. For details, refer to the instructions for the disc.
To use the above functions, it is recommended that you format the card on this unit.
Format the card using the following procedures. BD-Video data, such as secondary
video recorded on the card, can also be erased with the following procedures.
Formatting SD cards/Deleting data
Insert an SD card (> 14).
Press [FUNCTIONS].
Press [, ] to select "Other Functions" and press [OK].
Press [, ] to select "Card Management" and press
[OK].
Press [, ] to select "BD-Video
Data Erase" or "Format SD Card"
and press [OK].
Press [, ] to select "Yes" and
press [OK].
Press [, ] to select "Start" and
press [OK].
QT9129
24
e.g.,
TIPS
NOTE
Secondary video
Primary video
NOTE
TIPS
Card Management No. of Files 6
Free space 300 MB
SD card
BD-Video Data Erase
Format SD Card
NOTE
OK Format this SD Card.
RETURN
pPop-up menu also appears by pressing
[SUB MENU] and selecting "Pop-up Menu".
To exit the screen
pPress [POP-UP MENU].
pOnly the primary video is played during search/
slow-motion or frame-by-frame.
pIf the SD card is removed from this unit when
using data that was copied with the virtual
package function, disc playback stops.
pImages and audio may freeze momentarily
during playback.
pData cannot be copied in the following cases.
– The card is protected.
– Available capacity on the card is too small.
Delete unnecessary data or use a new card.
pWhen the function fails to work properly, even if
the data is copied, format the card again with this
unit. (In this case, all data will be erased.)
pIf an SD card with files in different formats is
used, images and audio may not play back
properly. It is recommended that you use an SD
card with no data or an SD card formatted on this
unit.
pIt is impossible to restore data after formatting
the card or erasing the data.
Once a card is formatted, all data including those
recorded on the PC is erased as well, even if the
data were protected with other equipment.
Confirm whether the card can be formatted.
[BD-V]