Panasonic SC-BT100 Operating Instructions Manual page 8

Blu-ray disc home theater sound system
Table of Contents

Advertisement

2
Basic connections
STEP
Connection to a TV with component video cable
TV
Component
Video cable
(not included)
This unit
≥Connect terminals of the same colour.
≥The video output resolution is restricted to "576p/480p" when DVD-Video, DivX and BD-Video discs recorded at a rate
of 50 frames per second is output from the COMPONENT VIDEO OUT terminals.
NOTE
§
These audio connections will enable you to play audio from your TV through your home theater system (
If you have a regular TV (CRT: cathode ray tube)
≥Progressive output may cause some flickering, even if it is progressive compatible. Turn off "Progressive" if you are
concerned about it. This is the same for multi system TV using PAL mode (
TIPS
To enjoy high definition/progressive video
≥Connect to a TV that supports 576p/480p or higher.
≥Set "Component Resolution" to "576p/480p", "720p" or "1080i". (
≥Set "HDMI Video Mode" to "Off". (
DIGITAL OUT connection
PCM (2ch) signal is output from the OPTICAL OUT terminal.
Other equipment
(not included)
Before purchasing an optical digital audio cable, check the terminal shape of the equipment to be connected.
NOTE
Connection to an amplifier via the SURROUND and SURROUND BACK terminals
You can enjoy 5.1ch or 7.1ch surround sound by connecting an amplifier using audio cable via the SURROUND and SURROUND
BACK terminals.
e.g., 7.1ch
This unit
RQT9161
8
COMPONENT
AUDIO OUT
VIDEO IN
Y
L
P
B
R
P
R
P
AUX
R
Y
P
B
COMPONENT VIDEO OUT
36) Otherwise, the video is output as 576i/480i.
OPTICAL
Optical digital audio cable
IN
(not included)
Do not bend sharply when
connecting.
SURROUND
SURROUND
BACK
L
L
R
R
Audio cable (not included)
SURROUND
SURROUND
BACK
OUT
§
Audio cable
(not included)
≥The optical digital
audio cable can be
used when
connecting to the
TV with optical out
terminals (
right).
36)
OPTICAL
OUT
IN(TV)
DIGITAL
Amplifier with 5.1ch/7.1ch
audio in terminal
Amplifier
(not included)
For SH-FX67 users
≥"
[W2S]
is not used. In this case, disconnect the digital
transmitter from this unit.
OPTICAL
OUT
Optical digital
audio cable
(not included)
OPTICAL
OUT
IN(TV)
DIGITAL
33, "Progressive").
This unit
Surround back speakers
(not included)
Surround speakers
(not included)
[W4S]
" or "
" flashes if the wireless system
§
19).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents