Table of Contents
Advertisement
P
H O N E B O O K
By Address Number
1. In the Standby mode, press the
Menu mode.
2. When Phonebook is selected, press the
3. Press the
( or
) button to scroll to Del Cell, then press the
button.
Result : Cell: [ ] is displayed on the LCD.
4. Enter the desired memory cell number, then press the
phone number and associated name (if any) are displayed.
Note: If the selected cell is empty, Data is Not Found is displayed. Then
the display shows the first available cell number in which a phone
number is stored.
5. Use the
( or
) button to display the next or the previous memory
cell.
6. If you want to delete the number, press the
Result : Delete? is displayed.
7. Press the
button to confirm the deletion.
Deleting All Number
1. In the Standby mode, press the
Menu mode.
2. When Phonebook is selected, press the
3. Press the
( or
) button to scroll to Del All, then press the
button.
Result : All Clear. Proceed? is displayed on the LCD.
4. Press the
button to confirm the deletion.
34
( or
) button to access the Main
button.
button. The
button.
( or
) button to access the Main
button.
Call Log
This facility is only available if connected to your Service Providers
network service. When you receive a call, the caller's phone number is
shown on your phone's display, if it is available from the network on
which the call was made. The last 20 numbers received are stored in
your phone and you can view the list and dial the numbers.
Viewing and Dialling the Received Numbers
1. In the Standby mode, press the
( or
Menu mode.
2. Press the
( or
) button repeatedly to scroll to CallLog , then
press the
button.
Result : The LCD window shows the last caller's number, and the date
and time when the call was received, if the necessary
information was transmitted from the caller's telephone
network.
If the cell number blinks, it means you missed the call.
If the number overflows the LCD window, the
the right side of the number and the remaining digits are displayed
after 5 seconds.
Note: If there is no number received, Call Log Empty is displayed.
3. Scroll the memory by using the
( or
corresponding to the desired cell number.
4. If you want to dial the selected number, press the
) button to access the Main
mark is displayed at
) button or press the keys
button.
35
- Quick Links:
- Connecting Lines
Hide quick links:
Advertisement
Table of Contents
