Installing Handset Batteries; Charging The Handset - Samsung SP-R7000 User Manual

G S
ETTING TA R T E D

Installing Handset Batteries

The handset uses the 2 rechargeable Ni-MH batteries (AAA size)
supplied.
1. Slide the battery cover in the
direction of the arrow.
2. Insert new batteries observing
correct polarity ( + , - ). Reversing
the orientation may damage the
handset.
3. Replace the battery cover.
Make sure that the cover is
properly aligned.
Slide the cover up until it
snaps shut.
Notes:
• The battery needs to be replaced if it does not recover its full storage
capacity after recharging.
• When replacing the battery, only use a SAMSUNG-approved battery.
For details, see 'Specifications' on page 53 or ask your nearest
service representative.
10

Charging the Handset

Before initial operation, YOU SHOULD FULLY CHARGE THE HANDSET for
more than 10 hours. Failure to do so will result in poor battery
performance which is not covered under the terms of the warranty. Also
for the charging of the additional handset.
To charge the handset, simply place it on the base unit.
When charging, the handset automatically turns on. The green lamp on
the top of the handset light up and the
filling and emptying.
G S
ETTING TA R T E D
icon on the LCD repeats
11