Operating Instructions; Demonstration Mode; Child Lock - Panasonic Inverter NN-CD757W Cookery Book & Operating Instructions

NN-CD757W / NN-CD767M / NN-CD748B
Turbo Bake
Chaos
M
Memory
* The design of your control panel
may vary from the panel displayed
(depending on colour), but the
words on the pads will be the same.
Letʼs Start to Use your Oven
Auto Menu/
Temperature
Time/
Weight
Start
NN-CD757W
1
Plug in
Plug into a 13 amp fused electrical socket. You will be reminded to
read your operating instructions.
2
Press Timer Pad twice to set clock
Set clock as a 12hr clock. (See page 16 for details).
3
Press Convection Pad
( will appear in the display window with the oven temperature)
(This procedure is to burn off the oil used for rust protection in the
oven.) Turn the Auto Menu/Temperature dial until 250C is in the
display window. Remove all accessories from the oven.
4
Enter Time
Turn Time/Weight dial until 5 minutes is displayed in the window.
5
Press Start Pad
The time will be displayed in the window and count down. The oven
will beep at the end of the program. The oven is now ready to use.
Caution: Grill elements and oven will be hot.
6

Demonstration Mode

This is to enable you to experiment setting various programs. (The
letter D will always appear in the display window. This is to confirm
that there is no microwave power produced and it is safe to use the
oven without any food). To select this mode press the clock pad three
times. "Demo mode press any key" will appear. To cancel press the
clock pad a further three times.
7

Child Lock

To operate the child lock facility press the Start pad three times, this
will deactivate the microwave. "Lock" will appear in the display and
none of the controls will operate. To clear child lock facility press
Stop/Cancel three times.
15