Selecting Enable And Disable (Digital Modes Only); Requesting A Dynamic Regrouping (Digital Modes Only) - Motorola Astro XTL 5000 User Manual

Selecting Enable and Disable (Digital Modes Only)

The dispatcher may classify regrouped units into one of two
categories: select-enabled or select-disabled.
Select-enabled Units are free to make mode changes to any of
the available talkgroups, including the dynamic
group.
Select-disabled Units cannot change modes because the
dispatcher has specifically chosen to force the
unit to remain in the dynamic mode.
Requesting a Dynamic Regrouping
(Digital Modes Only)
Pres the RPGM softkey to request regrouping.
A high-pitched tone sounds, indicating your request was received by
the system's central controller.
The display changes to REPROGRAM RQST while the request is being
processed.
If the regrouping request is acknowledged, a dispatcher-
acknowledge signal sounds (four high-pitched tones), and the
display shows ACK RECEIVED.
The radio then returns to normal operation.
If the regrouping request is not acknowledged within six to eight
seconds, the display alternates between showing NO ACKNOWLEDGE
and a low-pitched tone sounds.
At this time, do the following:
• Press the PTT button to resend the regroup request
OR
• Press the HOME button to return to normal operation.
ASTRO XTL 5000 Digital Mobile Radio with O5 Control Head
Trunking Operation
67