Initiating A Telephone Call From The List - Motorola Astro XTL 5000 User Manual

Initiating a Telephone Call from the List

Press the PHON softkey momentarily to select the phone
1
function.
A valid-key chirp is heard.
The display shows the last number dialed or a blank scratchpad
appearing as a series of dashes.
Press the  or  button to locate the number you want to call.
2
The display first shows the name, and then the number.
3 Press the PTT button.
The display shows the number that is automatically dialed.
Note: If the number contains a programmed pause, the dialing
pauses briefly when the display shows P. After the brief
pause, the rest of the numbers are dialed.
If you are out of range of the trunked system, the display
shows NO PHONE, and a continuous low-pitched tone
sounds. Press the PHON softkey to resume normal
operation.
If the trunked phone interconnect is in use or the phone
interconnect is out of service, a telephone-type busy tone
sounds, and the display shows PHONE BUSY. Your number is
automatically dialed when the phone interconnect becomes
available. If you hang up, you lose your place in the queue.
If the display shows PHONE BUSY with a low-pitched tone
rather than a telephone-type busy tone, the call is not
queued. You must hang up and try again.
4 When your party answers, press the PTT button to talk, and
release it to listen.
When the call is completed, press the PHON softkey to hang up
5
and return to normal operation.
ASTRO XTL 5000 Digital Mobile Radio with O5 Control Head
General Radio Features
37