Select Enable and Disable (Digital Modes Only)
The dispatcher may classify regrouped units into one of two
categories: select-enabled or select-disabled.
Select-enabled
Select-disabled
Request a Dynamic Regrouping
(W7 and W9 Control Heads Only) (Digital Modes Only)
1
Press the Rpg (W7) or Rpgm (W9) button to request
regrouping.
A high-pitched tone sounds, indicating your request was
received by the system's central controller.
The display changes to RPGM (W7) or RPGM RQST (W9) while the
request is being processed.
If the regrouping request is acknowledged, a dispatcher-
acknowledge signal sounds (four high-pitched tones), and the
display shows ACK RCVD .
The radio then returns to normal operation.
76
Units are free to make mode changes to any of
the available talkgroups, including the dynamic
group.
Units cannot change modes because the
dispatcher has specifically chosen to force the
unit to remain in the dynamic mode.
Trunking Operation