Table of Contents
Advertisement
ACTION
1 Open Door.
2 Press
Programme Lock Key.
LOCK
LOCK
Two Touch Operating Mode
Interrupted Programme
Setting New Programs
It is possible to check the programs that have been entered into the 16 Programme Number Pads. With the
door open, press Start Pad and Programme Number Pad 1 simultaneously (the oven will make an
acknowledging beep). After 2 seconds the display window will show each individual stage of each memory
programme in the order A1, B1, A2 etc. Finally it will display the beep tone setting and the programme lock
symbol (P L) before clearing to "0".
* If you want to know what mode is A5 programmed,
1. After starting to show in the display from A1 press Stop/Reset Pad.
2. Press Programme Number Pad 5.
3. Press Start Pad. (The display will show from A5 pad through the following Number Pads.)
How to release Programme Lock
INFORMATION
The oven light will come on.
Keep key pressed for 2 seconds until "P L" is
displayed.
KEEP DOOR OPEN.
After 2 seconds....
After 3 seconds...
The oven reverts to 2 Touch Operation mode.
Press required key number then press Start Pad.
If the door is opened during a programme, once
programme lock is released, the remaining heating
time will stay in the display window until the door is
closed and Start Pad is pressed.
Once Programme Lock is released, you can again
enter new heating programs and change the Beep
tone.
How to read Programme List
DISPLAY
A
1
2
3
B
A
1
2
3
B
A
1
2
3
B
A
1
2
3
B
19
Advertisement
Table of Contents
