How To Release The Program Lock; How To Read The Program List - Panasonic NE-C1153 Operating Instructions Manual

How to release the Program Lock

ACTION
1 Open Door.
2 Press
Program Lock Key.
LOCK Lock
Two Touch Operating Mode
Setting New Programs
It is possible to check the programs that have been entered into the oven's 100 memory programs. With the
door open, press Start Pad and Number Pad "1" simultaneously (the oven will make an acknowledging beep).
After 2 seconds the display window will show each individual stage of each memory program in the order 00,
01, 02 etc. Finally it will display the Beep Tone setting ,the program lock symbol (P L) and programed hours for
Schedule Cleaning Service (see page 22) before clearing to "0".
* For example if you want to know what mode is programmed in 78,
1. After starting to show in the display from "00" press Stop/Reset Pad.
2. Press Number Pads "7" and "8".
3. Press Start Pad. (The display will show from program 78 through the following Program number.)
INFORMATION
The oven lamp will come on.
Keep key pressed for 2 seconds until "P L" is
displayed.
KEEP DOOR OPEN.
After 2 seconds, "P" appears in display window.
After 3 seconds, display reverts to "o".
The oven reverts to 2 Touch Operating mode for
program "00" to "09".
Press required memory program number then press
Start Pad.
Once Program Lock is released, you can again enter
new heating programs, change the Beep Tone and
Preheat Temperature.

How to read the Program List

- 17 -
DISPLAY
MICRO TIME
PROGRAM
STAGE
1
2
3
PREHEAT %
CONV
MICRO TIME
PROGRAM
STAGE
1
2
3
PREHEAT %
CONV
MICRO TIME PROGRAM
STAGE
1
2
3
CONV PREHEAT %
MICRO TIME
PROGRAM
STAGE
1
2
3
PREHEAT %
CONV