Table of Contents
Advertisement
Operating your Oven as a Microwave
Multi-Stage (Sequential) Heating
Changing the Heating Time
Oven Lamp
Repeat Feature
Stop Pad
Heater Operation
The oven can be programmed with up to 3 different
functions to operate in sequence. These can be
MICROWAVE, GRILL, CONVECTION or
COMBINATION programs. If a required heating time is
greater than 15 minutes on HIGH/MEDIUM power, use
2 stage programming.
For 2 stage programming:
Follow steps 1-3 before then enter the next heating
programme, then press Start Pad.
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating
programme before pressing Start Pad.
The heating time can be increased or decreased
during cooking by turning the timer dial.
The Oven Lamp switches off when the door is closed.
If you want to check the food, press Lamp Pad, it will
then illuminate for 10 seconds.
The Oven Lamp turns on whenever the door is
opened.
You can repeat the same heating programme if you
press Start Pad within 1 minute of the previous
programme finishing.
After 1 minute, if Start Pad is not pressed, the display
returns to "0", or goes blank if the oven door is closed.
Before heating: One tap clears the display.
During heating: One tap stops the heating cycle and
two taps clears the display.
N.B. see page 18 for operation while in Programme
Lock.
When using HIGH, MEDIUM, LOW and SIMMER
powers, the half of GRILL elements and
CONVECTION fan operate to reduce the build up of
condensation. Take care NOT TO TOUCH OVEN
CEILING.
Please use the container suitable for Microwave and
Heat.
A
1
2
3
B
A
1
2
3
B
LAMP
START
STOP
9
Advertisement
Table of Contents
