Others Features; To Activate Program Lock; To Release Program Lock - Panasonic NE-1054F Owner's Manual

Other Features
A. To Activate Program Lock:
This procedure "Locks" the control panel Memory Pads into their programmed heating times
and power levels. DO NOT OPEN THE DOOR. The Display Window must be blank before the
Program Lock feature can be activated.
1.
NOTE: • Do not press PROG. Pad for longer than 30 seconds continuously, or false failure code may result.
• In "Program Lock"
a. The oven is started by pressing the desired Memory pad. There is no need to press the START pad.
b. The interrupt feature is deactivated-opening the door cancels the remaining time on the program.
c. The oven cannot be programmed until the program lock feature is deactivated.
B. To Release Program Lock:
This procedure deactivates "Program Lock" and activates all other features.
Oven reverts to a 2 touch operating mode (Memory Pad plus START Pad).
DO NOT OPEN THE DOOR. The Display Window must be blank before the Release Program
Lock feature can be activated.
1.
NOTE: • Do not press PROG. Pad for longer than 30 seconds continuously, or a false failure code may result.
• In "Program Unlock"
a. Repeat and interrupt features are operational.
b. Memory Pads can be programmed.
c. Tone loudness control is operational.
IP5102_3BS80RP_Eng_10_150121.indd 14 IP5102_3BS80RP_Eng_10_150121.indd 14
How to Operate
• Press and hold in the PROG. Pad until the
display shows "P" and "L". (for 6 seconds)
• Program Lock feature is now activated.
• Press the STOP/RESET Pad.
+ While pressing this pad, press the PROG.
Pad until the Display Window shows "P" (for
6 seconds).
• Program Lock Feature is deactivated, oven
is now in "Program Unlock" mode.
- 14 -
Display Window
Display Window
2015-1-21 10:00:35 2015-1-21 10:00:35