Rebound Damping Adjust; Qloc Hub Requirements - SR Suntour RAIDON Owner's Manual

SR SUNTOUR - OWNERS MANUAL
XCT V2 MLO SERIES
M2025 MLO SERIES
In order to lock your fork you have to
turn the lock out lever clockwise. Lo-
cking or unlocking your fork while ri-
ding is not posssible.

REBOUND DAMPING ADJUST

The rebound function of SR SUNTOUR hydraulic suspension forks allows you to tune your fork ac-
cording to your personal preferences and the terrain you are riding on. This function enables you
to control the speed of your fork's rebound after it's being compressed.
If you are going to ride on a terrain with a lot of small and fast bumps, we recommend to increase
your forks rebound speed. Otherwise it implies the risk that your front wheel loses its contact to
the ground. If you are going to ride on a terrain with a lot of big and slow bumps, we recommend
to decrease your forks rebound speed.
RAIDON RLD SERIES
RAIDON LOD SERIES
In order to increase the rebound speed
of your fork you have to turn the adjus-
ter knob counter clock-wise. To decrease
the speed you have to turn it clockwise.

Qloc hub requirements

According to function of our Qloc system there are some requirements hub's have to full l to
make this system work smoothly. Please nd the explanation down below:
RAIDON / XCR /XCM / XCT / M3000AL / M2025
Non-Recommend Shape
Limited Function
Edges within the hub can
cause the axle to get stuck
Adjuster
Knob
Recommend Shape
Full Function
No Edges
English
11