Displaying/Hiding On-Screen Information; Choosing Your Language; Setting The Vcr Output Channel; Selecting The Rf Out Sound Mode (B/G-D/K) - Samsung SV-645X Instruction Manual

Displaying/Hiding On-Screen Information

Your VCR displays most information both on the VCR and the
television.
(SV-645X/SV-641X)
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and Showview
function (SV-645X/SV-445G/SV-245G only), which cannot be
OPTIONS
hidden).
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
1 Press MENU on the remote control.
NICAM :ON
ECO. MODE :OFF Result:
IPC :ON
❿
END: MENU
" ❷ 2
Press the corresponding
USER SET
(SV-445G/SV-441G/SV-245G/SV-241G) 3
Press the OK button to select this option.
Result:
4
Press the corresponding
OPTIONS
selected.
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
5
To...
FORMAT 16:9 :AUTO
ECO. MODE :OFF
IPC :ON Display on-screen information
❿ END: MENU
" ❷
Hide on-screen information
6 On completion, press MENU twice to exit the menu.

Choosing Your Language

You can change the language in which information is displayed on
the screen.
1 Press MENU on the remote control.
Result:
PROG OPTIONS INSTALL
2 Press the corresponding
LANGUAGE SET
CLOCK BONUS LANG LANG
LANGUAGE SET
3
Press the OK button to select this option.
Result:
➛❿!! OK END: MENU
" ❷!!
4
Select the required language by pressing the
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result:
16
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷
option.
The menu is displayed.
USER SET
or buttons, until the OSD option is
" ❷
Press ➛ or ❿, until...
is displayed.
ON
OFF is displayed.
The programming menu is displayed.
, or ➛, ❿ buttons to select the
" ❷
option.
The LANGUAGE SET menu is displayed.
or buttons.
" ❷
From now on, all the on-screen information will be
displayed in the language selected.

Setting the VCR Output Channel

Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷
INSTALLATION option.
3 Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the
" ❷
CH option is selected.
5 Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).

Selecting the RF OUT Sound Mode (B/G-D/K)

You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or ➛, ❿ buttons to select the
" ❷
INSTALLATION option.
3 Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the
" ❷
option is selected.
5 Press the ❿ button to select G or K.
6
On completion, press MENU twice to exit the menu.
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿!! OK END: MENU
" ❷!!
VCR OUTPUT INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿ END: MENU
" ❷
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿!! OK END: MENU
" ❷!!
TV SYSTEM
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿ END: MENU
" ❷
17
GB