Recording A Programme With Automatic Stop - Samsung SV-645X Instruction Manual

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours of
programmes. (LP)
Your VCR stops automatically after the requested length of time.
1
Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used)
3
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
(SV-641X/SV-441G/
(SV-645X/SV-445G)
SV-245G/SV-241G) Result:
CT
IPC INPUT
VCR INPUT 4
Select:
4
4
REPEAT
REPEAT
DISPLA
DISP./
RK PROG
OL PROG/TRK
Result:
4
4
With SV-645X/SV-641X/SV-445G/SV-441G, you can select the
REC MENU
recording speed (SP/LP). Press the SPEED button.
5
5 Hold the REC button down for a while to start recording.
OK
Result:
SPEED DUB TV/VCR TIMER
6 Press the REC button several times to increase the recording time
in:
Result:
LENGTH 2:30
SET LENGTH :
7 If you wish to cancel the recording before the end, press
PRESS REC
VCR STANDBY/ON (STANDBY/ON).
26
The VCR is switched on automatically.
The station to be recorded using the PROG/TRK (" or ❷) /
PROG (" or ❷) buttons
or
The AV1, AV2 or AUX (SV-645X/SV-641X/SV-445G/
SV-245G only) source using the INPUT button for a satellite
tuner or external video source
The channel number is displayed and the programme
can be seen on the television.
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 36).
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
If the end of the tape is reached while recording:
The recording stops
The VCR automatically turns off